| 型號 | Model | ZX-1300 | |||
| 射膠系統 | Injection unit | 單位 Unit | A | B | C |
| 射膠系統 Injection unit | |||||
| 螺桿直徑 | Screw diameter | mm | 110 | 120 | 130 |
| 螺桿長徑L/D | Screw L/D ratio | - | 22.5 | 21 | 19 |
| 理論射膠容積 | Theoretical shot volume | cm2 | 5702 | 6786 | 7964 |
| 射膠重量(PS) | Shot weight (PS) | g | 5246 | 6243 | 7327 |
| 射膠重量(PS) | Shot weight (PS) | oz | 185.4 | 220.6 | 258.9 |
| 螺桿行程 | Screw stroke | mm | 600 | ||
| 射膠壓力 | Injection pressure | Mpa | 205 | 172 | 147 |
| 理論射膠速率 | Injection rate | g/s | 997 | 1170 | 1358 |
| 最大螺桿轉速 | Max. screw speed | rpm | 100 | ||
| 鎖模系統 Clamping Unit | |||||
| 鎖模力 | Clamping force | KN | 13000 | ||
| 移模行程 | Toggle stroke | mm | 1160 | ||
| 拉桿間距 (H*V) | Space between tie bars | mm | 1300*1250 | ||
| 最小模厚 | Min.mold thickness | mm | 550 | ||
| 最大模厚 | Max.mold thickness | mm | 1300 | ||
| 頂出行程 | Hydraulic ejection stroke | mm | 320 | ||
| 頂出力 | Hydraulic ejection force | KN | 215 | ||
| 其他 Others | |||||
| 油壓系統壓力 | Hydraulic system pressure | Mpa | 16 | ||
| 油泵馬達功率 | Pump motor | kw | 37*3/65+76 | ||
| 電熱量 | Heating capacity | kw | 85 | ||
| 郵箱容量 | Oil tank capacity | L | 2000 | ||
| 外形尺寸 | Machine dimensions | m | 13.8*3*3.4 | ||
| 理論機重 | Machine weight | Tom | 66 | ||
- CN